Calculated by material consumption rate
The data is structured around primer, base coat, colour finish coat, presealer, and sealer consumption for each application system.
This tool helps estimate microcement materials for new walls, new floors, bathroom floors, and bathroom walls. Enter the project area, select the wastage allowance, and the calculator will estimate material consumption, required packaging units, projected material cost, and the value share of each material group.
The data is structured around primer, base coat, colour finish coat, presealer, and sealer consumption for each application system.
Purchase cost is rounded up by pail, can, or kit to better match real ordering and on-site application conditions.
The result includes a detailed material table, cost breakdown charts, and technical guidance for microcement project consultation.
This tool estimates the required quantities of primer, base coat, colour finish coat, presealer, and sealer based on the actual project area.
Yes. For real projects, a wastage allowance of around 10% is recommended to cover corners, edges, substrate preparation, and application variation.
No. The result is a material estimate only. The final quotation also depends on substrate condition, project scale, labour, and the required finish specification.
Yes. Wet areas should be checked carefully for waterproofing, substrate moisture, pipe penetrations, floor-wall junctions, and suitable sealer specification.