RUST-EFFECT METAL PAINT – ZENOXID

ZenOxid is a metal paint line specifically designed to achieve a metallic appearance and a unique rust effect, when combined with the oxidizing activator ZenRust.

We offer products to create finishes that simulate: Bronze, Copper, Iron, and Brass.

This product line is ideal for bringing an industrial style and a distinctive touch to any non-traffic-bearing surface. It is versatile and can be applied in both interior and exterior spaces.

Technical Specifications

PropertyDetails
Application flexibilityCan be applied with a trowel, paintbrush, brush, sponge, roller, or spray gun.
ApplicabilityFor use on all non-traffic-bearing surfaces.
Compatible surfacesMicrocement, concrete, brick, ceramics, etc.
High adhesionOn low-absorption areas, we recommend using the adhesion promoter ZenPrimer 200 before application.
Ready-to-useThe product is ready to use. Do not dilute with water.

APPLICATION METHOD FOR ZENOXID

1

Surface Cleaning

Before applying ZenOxid, ensure the substrate is clean and dry. To guarantee absolute cleanliness, use a vacuum cleaner if necessary.

2

Surface Preparation

  • Apply 01 coat of ZenPrimer 100 if the surface is absorbent (porous).

  • Apply 01 coat of ZenPrimer 200 if the surface is NOT absorbent.

3

Base Coat Application

Use a trowel to apply 01 coat of ZenOxid to the desired area.

  • Drying time: 24 hours.

4

Creating the Oxidation Effect (Rusting)

  • Sand the surface.

  • Polish (pulir) the surface.

  • Use the ZenRust activator to accelerate the oxidation process (create rust marks).

5

Protective Base Coat

Use 02 coats of ZenCover to protect the surface:

  • Coat 1: Allow to dry for 4 hours.

  • Coat 2: Allow to dry for 12 hours.

6

Final Finishing Coat

Lightly sand and wait for 12 hours. Then, apply 02 coats of ZenSealant 2K protective sealer:

  • Coat 1: Allow to dry for 24 hours.

  • Coat 2: Allow to dry for 24 hours.

New Catalog Gọi ngay Zalo Bản đồ