It is time to immerse yourself in a world of exclusive experiences. Make every swim more memorable and relaxing than ever before with our specialized swimming pool microcemento line, Zen Pool.
With this two-component microcemento formulated specifically for pools, you can create seamless spaces where luxury and modernity blend flawlessly across every edge, pool wall, and floor. This coating is engineered to endure over time thanks to its outstanding technical properties. Formulated as a high-performance mortar, it offers exceptional UV resistance, withstands water vapor, and resists impacts, ensuring an untarnished, flawless appearance indefinitely.
With Zen Pool, infinity effects are no longer limited to just swimming pools; other spaces such as fountains, landscape ponds, saunas, spas, or any area in constant contact with water can fully benefit from these aesthetic advantages. This microcemento line is highly workable, allowing applicators to flexibly implement various techniques, including the wet-on-wet (fresco sobre fresco) application method.
Zen Pool XXL is a specialized preparation (base coat) microcemento engineered exclusively for swimming pools, featuring a grain size of up to 0.9 mm. This distinct characteristic provides the surface with a coarse, textured finish and superior hardness compared to conventional coating materials, ensuring extreme durability across any application area. The product’s versatility unlocks a wide range of practical applications, guaranteeing absolute structural stability for the pool floor (permanently submerged), as well as the pool walls and surrounding walkways.
This large grain size creates a surface profile that not only makes new construction or renovation projects more beautiful and resilient but also introduces a vital safety component. With Zen Pool XXL, you can effortlessly create highly secure, slip-resistant zones — a paramount factor when designing and building swimming pools.
| Technical Parameter | Detailed Value |
| Maximum Grain Size | 0.9 mm |
| Flexural Strength (28 days) | More than or equal to 9 N/mm2 |
| Slip Resistance (EN-ENV-12633) | Class 2 or Class 3 (Depending on the finishing technique) |
| Compressive Strength (EN 13892-2) | More than or equal to 55 N/mm2 (28 days) |
| Adhesion Strength (EN 13892-8) | More than or equal to 1.5 N/mm2 (28 days) |
| Consumption Rate / Coverage | 4.0 kg/m2 (2-coat process) |
| Packaging Specification | 18 kg bucket |
With Zen Pool XL, our finishing microcemento line designed specifically for swimming pools, the grain size is refined to just 0.6 mm. This provides high smoothness, creating a soft and sleek feel for every coated surface. This is the essential finish required to design seamless infinity surfaces, offering an atmosphere of absolute relaxation at any time.
However, in contrast to its refined and elegant appearance, this coating layer is extremely durable, reinforcing the strength of the entire microcemento system. It is a perfect combination of aesthetic uniformity and high performance for surfaces that stretch endlessly.
| Technical Parameter | Detailed Value |
| Maximum Grain Size | 0.6 mm |
| Flexural Strength (28 days) | More than or equal to 9 N/mm2 |
| Slip Resistance (EN-ENV-12633) | Class 2 or Class 3 (Depending on the polishing technique) |
| Compressive Strength (EN 13892-2) | More than or equal to 55 N/mm2 (28 days) |
| Adhesion Strength (EN 13892-8) | More than or equal to 1.5 N/mm2 (28 days) |
| Consumption Rate / Coverage | 3.0 kg/m2 (2-coat process) |
| Packaging Specification | 18 kg bucket |
Zen Resin Pool is a specialized water-based acrylic resin used as the primer and the liquid binding agent for the Zen Pool system. This serves as the vital Component B, which enhances water vapor resistance while strengthening both the permeability and waterproofing capabilities of the surface.
Another outstanding benefit of this product is that, when applied correctly, it minimizes cracks caused by material shrinkage to the greatest extent possible.
| Parameter | Detailed Value |
| Consumption Rate / Coverage | 1.00 kg/m2 (Standard 2-coat process) |
| Packaging Specification | 20 kg bucket |
Zen Sealant Pool is a water-based protective coating designed to enhance both the mechanical durability and chemical resistance of surfaces that have been coated with swimming pool microcemento. This exceptional advantage is achieved thanks to its specialized formula containing lithium salts.
This product offers extremely high alkali resistance, making it particularly suitable and highly effective in environments that are continuously exposed to moisture and water.
| Parameter | Detailed Value |
| pH Level | 10.5 – 11.5 (Alkaline) |
| Application Temperature | – Substrate: 5 – 25 degrees C – Ambient: 5 – 30 degrees C |
| Drying Time Between Coats | 24 hours |
| Consumption Rate / Coverage | 10 – 15 m2/Liter |
| Packaging Specification | 5 Liter can |
As previously mentioned, this is a highly waterproof product. It guarantees that no cracks due to material shrinkage or air bubbling phenomena will appear on the surface.
This microcemento line is designed for application in both freshwater and saltwater swimming pools. In both environments, the product maximizes its outstanding properties of chemical resistance and mechanical durability.
With Zen Pool, the swimming pool becomes an ideal place for relaxation thanks to its seamless, joint-free surface, which perfectly aligns with the most modern decorative design trends.
Whether on the pool walls, the pool floor, or the surrounding walkways, this microcemento can be applied to any surface, ensuring the best results for each specific area.
Thanks to its specific grain size and specialized protective coating, Zen Pool completely eliminates the risk of slipping in and around the pool area.
Because it creates a continuous, joint-free surface, the product prevents the accumulation of dirt, algae, and mold, helping to keep the swimming pool in the best possible condition at all times.
This characteristic is best demonstrated through the “wet-on-wet” (fresco sobre fresco) application technique, which allows applicators to flexibly create a variety of decorative effects.
Zen Resin Pool is a specialized water-based acrylic resin designed exclusively for the Zen Pool microcemento system. This product acts as Component B, providing the coating surface with superior adhesion and hardness, while simultaneously creating excellent breathability and powerful water resistance.
Below is the mixing procedure that must be strictly followed from start to finish to achieve the best results:
First, to achieve the highest efficiency and functionality during application, it is essential to be extremely precise when measuring both the resin and the prepared microcemento powder. To ensure the mixture reaches optimal quality, the following ratios must be strictly followed:
10 kg of Zen Pool XL powder: Mix with 3.2 – 3.5 liters of Zen Resin Pool.
10 kg of Zen Pool XXL powder: Mix with 3.0 – 3.1 liters of Zen Resin Pool.
Important Note: These ratios may vary slightly depending on the climate conditions (temperature and humidity) at the time of application.
Once the components have been carefully measured, pour them into a clean container (mixing bucket). Use an electric mixer (this is a mandatory recommendation to ensure quality) to stir both components thoroughly until a uniform, smooth, and completely lump-free mixture is obtained.
After extensive experimental research, we have decided to streamline the color palette specifically for the swimming pool microcemento line down to two neutral tones: Pigmented White (Blanco Pigmentado) and Natural White (Blanco Natural). These are two options that perfectly coordinate with both the surrounding landscape and the structure of the pool itself.
These tones enhance the feeling of peace and relaxation. When spread across seamless, joint-free surfaces, the sense of an “infinity” space is elevated even more powerfully.
First, to achieve the highest efficiency and functionality during application, it is essential to be extremely precise when measuring both the resin and the prepared microcemento powder. To ensure the mixture reaches optimal quality, the following ratios must be strictly followed:
10 kg of Zen Pool XL powder: Mix with 3.2 – 3.5 liters of Zen Resin Pool.
10 kg of Zen Pool XXL powder: Mix with 3.0 – 3.1 liters of Zen Resin Pool.
Important Note: These ratios may vary slightly depending on the climate conditions (temperature and humidity) at the time of application.
Once the components have been carefully measured, pour them into a clean container (mixing bucket). Use an electric mixer (this is a mandatory recommendation to ensure quality) to stir both components thoroughly until a uniform, smooth, and completely lump-free mixture is obtained.
To ensure the microcemento adheres perfectly to the surface, apply a layer of Zen Resin Pool using a roller. The drying time is between 30 and 45 minutes.
Proceed to mix the coloring agent with the microcemento:
Shake the Zen Color Pool bottle well and mix it into the Zen Resin Pool liquid.
Then, add the Zen Pool powder (XXL or XL) according to the correct ratio and stir thoroughly for about 4 minutes.
At this stage, apply two layers of Zen Pool XL:
Standard method: Wait 4 to 8 hours between the two layers.
“Wet-on-wet” technique: Apply the second Zen Pool XL layer just 1 hour after applying the first layer.
To protect the microcemento, apply two layers of Zen Sealant Pool after the final finish has dried for at least 24 hours.
The waiting time between the two protective coating layers is 4 to 8 hours.
After completion, the surface must be allowed to dry completely for 7 days.
After exactly 7 days from the application of the final protective coating, you can begin filling the swimming pool with water.
The coating system must have a thickness ranging from 3 to 5 mm. Under no circumstances should this thickness be exceeded. If a higher degree of surface smoothness is desired, simply sand the layers using sandpaper with a grit size of 40 or 80.
Stop the application process and postpone it to another time when it is not raining. We highly recommend that you carefully check weather forecasts before starting.
There is absolutely no problem. This microcemento system for swimming pools can be used for both existing pools (renovation) as well as swimming pools that are in the process of being newly built.
Certainly, that is possible. Just ensure that the concrete surface is treated with a waterproofing agent (hidrofugar) beforehand to ensure the substrate is in the best possible condition.
This system is not compatible with waterproofing mortars (morteros impermeabilizantes) and mosaic tiles (gresite), as the adhesion (anchoring) on these surfaces cannot be guaranteed.
ZenPool is a system that features its own dedicated specialized primer, which is ZenSealant Pool.
ZenSealant Pool is designed as a specialized protective coating for the MyPool swimming pool microcemento line. If a different type of coating is used, the chemical resistance and hardness will be compromised; therefore, we do not recommend this.
Thanks to its fast-drying speed, you can absolutely apply both protective coating layers on the same day. Just ensure that the waiting time between layers is between 5 and 6 hours.
It is possible, but we recommend not using colors other than the two tones, Natural White (Blanco Natural) and Pigmented White (Blanco), included in the color palette, as these are the only colors for which we offer a warranty.
Maintenance should be carried out similarly to any other type of swimming pool or material. However, we recommend cleaning with a high-pressure water jet periodically, once every one or two years, on the final protective coating. Note that before performing this step, it is necessary to lightly sand the surface.
Specifically, 7 days after the protective sealing (sellado) process has been completed.
Yes. Thanks to the superior hardness of this microcemento system, it can also be used to apply a coating for terraces.
Of course, it can. MyPool is a system designed to be applied to both saltwater swimming pools as well as those using conventional chlorine.
It is very simple. After applying the third layer, proceed to apply the fourth layer between 4 to 8 hours later. This is how the “fresh-on-fresh” (fresco sobre fresco) technique is applied to our MyPool swimming pool microcemento system.
